CarX Builder
C4

Touge · AWD

EV6 C3 touge

EV6 (Mitsubishi Lancer Evolution VI)

by Rtue · published on 15/11/2026 · 15 views

Use as a base

235

Power

931

Weight

273

Max speed (aero drag)

Inputs

Values used for the calculation

The car data entered for this build. Enter the same values to get the same setup on your car.

Engine

Power (HP)
235
Rev limiter (rpm)
7381
Low torque (Nm)
247
Mid torque (Nm)
169
High torque (Nm)
147
Turbo pressure (bar)
0.57
Fuel
Sport
Peak power (HP)
235 @ 7381 rpm
Peak torque (Nm)
315 @ 2750 rpm
Powerband (dyno)
6250 – 7381 rpm

Chassis

Weight (kg)
931
Front weight balance (%)
61
Center of mass height (inches)
10.4
Wheelbase (m)
2.5
Front track (m)
1.51
Rear track (m)
1.505

Tires

Front tires
265/45 R14
Rear tires
265/45 R14
Front tire grip (index)
1.08
Rear tire grip (index)
1.08

Aero

Drag coefficient (Cx)
0.28
Air Resistance (Sx)
2.04
Front downforce (kg)
42
Rear downforce (kg)
47

Gearbox

Number of gears
6
Default final drive (ratio)
3.7
Default last gear (ratio)
0.8
Gear spacing
Standard

Spec sheet

Installed parts

Engine

46G3

  • Block BLC [P] Low torque : 247 N·m Prototype
  • Camshaft CSH [P] High torque : 147 N·m Prototype
  • Cylinder head HCE [P] Mid torque : 169 N·m Prototype
  • ECU ECU [P] Rev limiter : 7381 rpm Turbo pressure : 0.57 bar Prototype
  • Exhaust EXS [P] Prototype
  • Exhaust manifold Leave stock Stock
  • Fuel system Leave stock Stock
  • Intake manifold INT [P] Peak RPM : 10002 rpm Prototype
  • Turbo Leave stock Stock

Gearbox

T50S

  • Gearbox Leave stock Stock
  • Clutch CLH [P] Prototype
  • Differential Leave stock Stock
  • Drivetrain Leave stock Stock

Body

Stage 4

  • Weight reduction Weight reduce [P] Prototype
  • Body strengthening Leave stock Stock
  • Front aero Front aero [P] Prototype
  • Rear aero Rear aero [P] Prototype
  • Fuel tank Leave stock Stock

Suspension

  • Front springs F_SS [P] Prototype
  • Rear springs R_SS [P] Prototype
  • Front shocks F_S [P] Prototype
  • Rear shocks R_S [P] Prototype
  • Front anti-roll bar F_SB [P] Prototype
  • Rear anti-roll bar R_SB [P] Prototype
  • Front arms F_ARM [P] Prototype
  • Rear arms R_ARM [P] Prototype
  • Brakes BR [P] Prototype

Wheels

  • Front rims 265/45 R14 Street
  • Rear rims 265/40 R14 Street
  • Front tires Racing Racing
  • Rear tires Racing Racing
  • Front spacers Leave stock Stock
  • Rear spacers Leave stock Stock
  • Tyre compound Racing+ Racing
01

Transmission

Final drive 3.03
Gear 1 2.76
Gear 2 2.32
Gear 3 1.93
Gear 4 1.61
Gear 5 1.34
Gear 6 1.12

Gear ratios and final drive calculated by the Build Lab for this discipline.

02

Differential

Front

Accel lock 0.05
Decel lock 0.03
Preload 62Nm

Values computed for your car and kept within the sliders of your differential (a Clutch 65 if none is declared).

Rear

Accel lock 0.25
Decel lock 0.13
Preload 143Nm

Values computed for your car and kept within the sliders of your differential (a Clutch 65 if none is declared).

Differential part not declared: values computed and bounded for a Clutch 65 (locks 0 to 1, preload 0 to 520 Nm). With a Clutch [P], sliders go from 0.6 to 1 (acceleration), 0.3 to 1 (coast) and 0 to 100 Nm. With a Clutch 45, from 0.2 to 0.8 and 0 to 315 Nm. Ranges with every tuning step purchased. Declare your part in the form for values you can surely set.

Stability first: the rear must never let go before the front. Preload keeps the inner wheel from spinning over a bump at the throttle you hold through a typical corner (computed from aero and tyre drag) and keeps the lock smooth between throttle and lift-off. Acceleration lock adds only what is still needed so the inner wheel doesn't spin up to 60 % of your lateral grip: on a rear-wheel drive car, more would push the rear out (in-game hint). Coast lock is half the acceleration lock (1.5-way), gentle so the car doesn't rotate when slowing down.

03

Suspension

Front

Stiffness 87.1kNm
Suspension travel 92.3mm
Anti-roll bar 60.8kNm
Slow bump 6899
Fast bump 3449
Slow rebound 9818
Fast rebound 4916

Rear

Stiffness 69kNm
Suspension travel 100.8mm
Anti-roll bar 25.7kNm
Slow bump 4947
Fast bump 2473
Slow rebound 7020
Fast rebound 3592
04

Steering, camber & toe

Caster 5.06°
Steering angle 54.55°
Ackermann 67.83%
Braking 76% AV
Front camber under load estimated -0.84°

Car resting on its wheels, standing still (static load, no roll or load transfer). In game, set -3.08° in the garage.

Front camber (garage setting) -3.08°
Rear camber under load estimated 2.49°

Car resting on its wheels, standing still (static load, no roll or load transfer). In game, set -0.45° in the garage.

Rear camber (garage setting) -0.45°
Front toe 0°
Rear toe 0°
05

Aerodynamics and weight reduction

Front downforce 42kg
Rear downforce 47kg
Drag coefficient (Cx) 0.28
Frontal area (Sx) 2.04m²
Mass towards the front 60.8%
Mass height 11.92%
Body mass 682kg
06

Brakes and tyres

Max brake torque 4950N·m
Front tyre pressure 3bar
Rear tyre pressure 3bar
07

Gearbox: extras

Reverse gear 3.58
Shift delay 0.04s
Transmission loss 0.1
Calculation details & input data

Theoretical top speed

255.7 kph

Max speed (aero drag)

272.7 kph

Powerband

6250 → 7381 rpm

Gear 123456
Top speed per gear (km/h) 104124148178214256
Power
235 hp
Weight
931 kg
Class
C4 (252.4 HP/t)
Front balance
61 %
Rev limiter (rpm)
7381
Wheelbase (m)
2.5 m
Center of mass height (inches)
10.4 inches
Front
265/45 R14 · 1.08
Rear
265/45 R14 · 1.08
Front/rear frequencies
2.7060339866023 / 2.9363812777237 Hz
Target roll gradient
0.072°/g · TLLTD 70.3 %
Engine curves

You may also like

Full gallery →

Build your own setup

Gearbox, differential, suspension and alignment computed for your car and discipline. In under 2 minutes.

Create my account

Build Lab · New

Pick a car and a class. Get the whole build.

Engine, parts and every setting, computed for you from a class and a driving style. No dyno screenshot needed.

Build my car for free

One Build Lab build free on every account.

See how it works

CarX Street touge tune: gearbox, suspension and differential